Page 68, Fig. 4 “5in min. separation…”; should say “5ft min. separation…”
Page 83, Table 11 Says "One 14 inch vent"; should say “One 1 1/4 inch vent”
Page 104, Fig. 62 says “1sq. in./4k Btu…”; should say “1sq. in./2k Btu…”
Page 112, Fig. 80 says “Not less than 1/2 in. per ft.”; should say “Not less than 1/4 in. per ft.”
Page 126, Second says “KEY TO CODE CHECK PLUMBING…”; should say “KEY TO CODE CHECK HVAC…”
Page 162, Fig. 45 is in error – the sediment trap should be after the shutoff valve and connector, not before.
Page 163, Illustration of FVIR Water Heater has an error – the sediment trap should be at the left of the water heater valve, downstream of the connector
Page 189, Right column, 4th checkbox, says "min 2in diameter..."; should say “min 1/2in diameter…”
Page 201, Left column, third checkbox, add “in” (inch) after “1/4 ".
Page 207, Left column, last item, says “Accessible receps req’d front and rear max 62ft…”; should read "6 1/2ft"
Page 214, Left column, first bullet, change “14” to "1 1/4”
Right column, first bullet, second line, change “24” to “2 1/2”
Under AC – Armored Cable (BX) second bullet, change “42” to “4 1/2”
Page 219, Left column, 2nd bullet, change “42ft” to “4 1/2ft”
3rd dot under that bullet, change “2 to 14in” to “1/2 to 1 1/4in”
4th dot under that bullet, change “12 to 2in” to “1 1/2 to 2in
Page 222, 6th checkbox in left column says “No wallboard gaps >8in…”; should say “No wallboard gaps >1/8in…”
Page 224, Second and third checkbox items in left column each say “8hp”; should say “1/8hp”
Page 228, Third subheading says "Equipment Grounded Conductors"; should be "Equipment Grounding Conductors"
Page 235, Fig. 89 Black wire shown connecting to the left side of the receptacle, should connect to the right side
